1. Stop the pump. 2. Turn multi-port valve handle to the "backwash" position. 3. Start the pump. 4. Allow waste to run out of side of discharge for 1-3 minutes or until discharge water is clear. 5. Stop the pump. 6. Turn multi-port valve handle to "rinse" position. 7.Start the pump. 8.Allow water to discharge on rinse position for approximately 30-45 seconds. 9. Stop the pump. 10. Turn multi-port valve handle to "filter" position. 11. Start the pump. Tips Backwash at least once a week. Always backwash and rinse after vacuuming. Chemically clean filter twice a season. |